> For the complete documentation index, see [llms.txt](https://docs.themeatstick.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.themeatstick.com/your-product/blow/power.md).

# Powering your Blow

The Blow has a USB-C port and comes with a USB-C to USB-A cable. **A wall adapter is not included.**

## What to plug it into

* **A USB charger or power bank rated 5 V / 2 A or higher.** That's what runs the fan at full speed. A higher-rated source is fine.
* **A lower-rated source still works** (for example a 5 V / 1 A charger), but the fan may not reach full speed. You'd notice it on a slow climb to temperature.
* **For overnight cooks, a wall charger is the safest choice.**

A wall socket on its own isn't a power source for the Blow: plug the cable into a USB charger.

## Watch out for power banks that switch themselves off

Many power banks shut down when the device plugged into them draws very little power. Once the Blow is holding temperature, its fan runs gently, so a power bank can cut out **mid-cook**, long after everything looked fine at the start. If the Blow loses power, the fan stops and the app alerts you.

For long cooks, use a wall charger rather than a power bank.

## Your Forge Hub needs power too

The Blow and your V Forge WiFi Hub are powered separately. The Hub runs on its own battery, but if it runs out, it can't run the Blow and the fan stops. **For long cooks, plug both in.**

## Can I power the Blow from my Forge Hub?

No. The Hub's port is for data only and can't drive the fan. The hub cable carries control signals between them, and the Blow needs its own USB power.
