> For the complete documentation index, see [llms.txt](https://docs.themeatstick.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.themeatstick.com/your-product/blow/mount-kamado.md).

# Mounting on a kamado

No drilling. On a ceramic kamado, the Blow mounts over the bottom draft door using one of the included stainless plates.

## 1. Fit the spring clip to the Blow

The spring clip ships separate from the fan. Fit it first: [Fit the spring clip](https://docs.themeatstick.com/your-product/blow/mount-kettle-bullet-drum#fit-the-spring-clip).

## 2. Pick your plate

Use the plate that covers your draft door opening: the **Large plate** for bigger draft doors (including extra-large kamados), the **Medium plate** for smaller ones.

* **Compact kamados** with a small metal draft door can skip the plate: the Blow mounts straight onto the metal draft door, and the gasket seals against it. Tape any remaining gaps.

## 3. Mount it

1. Open the bottom draft door and set the plate over the opening.
2. Push the Blow's spring clip through the plate's opening so it locks in, with the gasket pressed flat against the plate.
3. Check the Blow hangs **body-down, with its ports facing the ground**. If it hangs any other way, take it off and re-seat it.
4. Seal any gaps around the plate with the high-temp foil tape.

<figure><img src="https://480337956-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-Mg4Jg9fo_8jMW0As7z7%2Fuploads%2FKimsn39xFITw1RCOAs1U%2Fblow-mount-kamado.png?alt=media" alt="The Blow mounted on a kamado"><figcaption><p>1: the plate over the bottom draft door. 2: open the damper before you cook.</p></figcaption></figure>

## 4. Set the vents

* **The Blow must control all the air.** Close every other intake, and foil-tape anything that leaks.
* **Start the top vent at about a pencil-width** (about ⅛ open), then adjust after your first cook.

> **Kamados hold heat.** Start with a small amount of lit charcoal so you don't overshoot your target: a ceramic cooker can take 30 to 60 minutes to come back down.

Next: [Set it up](https://docs.themeatstick.com/your-product/blow/set-up), step 3: connect the probe, the Hub and power
