Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Care, storage and weather

Cleaning

  • Let the Blow and the rest of your gear cool completely first.

  • Wipe the housing and nozzle with a dry or lightly damp cloth. Don't soak it, hose it down, or use solvents. Never put it in a dishwasher.

  • Keep the intake and outlet clear of ash and grease.

  • Kamado plate: wipe the channel clear of ash so it seats flat next time.

  • Wired Ambient Probe: see Cleaning the Wired Ambient Probe.

Check the gasket every cook

The face gasket seals the Blow to your cooker or plate. If it looks compressed, cracked or sooty enough to leak, clean it, and replace it if it no longer seals. A leaky seal lets in air the Blow can't control, and the cooker won't hold temperature.

Storing it

  • Take the gasket off for storage. Left squashed for weeks, it takes a set and stops sealing. You can leave the spring clip fitted.

  • Keep the gasket with the Blow and refit it before your next cook. Running without it is an air leak.

  • Store the Blow dry, indoors and out of direct heat (in the Carry Case Blow, if your set came with one).

  • Coil cables loosely, without kinks.

  • Drilled a hole for the Blow? Cover it with the high-temp foil tape from the box while the Blow is off the cooker.

Weather

The Blow is not waterproof.

  • Mount it ports-down.

  • Avoid direct rain and spray.

  • Bring it indoors to store.

  • In freezing weather, make sure no water has collected in the housing before you use it.