> For the complete documentation index, see [llms.txt](https://docs.themeatstick.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.themeatstick.com/your-product/blow/alerts.md).

# Blow alerts

Your Forge Hub watches the pit all cook long and the MeatStick App tells you when something needs you. The Hub makes the decisions, so it keeps protecting the cook even if your phone is asleep or out of range.

**How alerts reach you:** near the cooker, alerts come straight from the Hub to your phone over Bluetooth. Away from home, they travel over WiFi and the MeatStick Cloud, so allow up to about a minute. Keep notifications on for the MeatStick App.

## Pit temperature

| Alert               | What it means                                                                                                                                              | What to do                                                                                                                    |
| ------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------- |
| **Pit at target**   | The pit has reached your target and the Blow is holding it.                                                                                                | Put the food on, or walk away.                                                                                                |
| **Pit running hot** | The pit has stayed above your target for several minutes even though the fan has stopped. The fire is getting air from somewhere the Blow doesn't control. | Close the top vent partway, check the lid is closed, and fit the Blow's damper if it's off. Look for unsealed vents or leaks. |
| **Pit too hot**     | The pit is far over target.                                                                                                                                | Close the top vent and every other vent now, and keep the lid shut.                                                           |

The "Pit too hot" alert repeats every few minutes until the pit comes down, so it's hard to miss.

## Lid open

When you lift the lid, the Blow notices the sudden drop and pauses the fan so it doesn't fan the flames. You'll see a **Lid open** note in the app (no notification, since you're standing at the grill). The pause lasts about two minutes, then the fan picks back up on its own. Close the lid as soon as you can.

## The Blow and its probe

| Alert                     | What it means                                                                                                                                                                                       | What to do                                                                                  |
| ------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------- |
| **Blow disconnected**     | Your Forge Hub lost contact with the Blow: the hub cable came out, or the Blow lost its power. The fan has stopped safely. Your pit temperature is gone too, because the probe plugs into the Blow. | Check the hub cable at both ends, and check the Blow has power.                             |
| **Blow fan problem**      | The Hub is telling the fan to run, but it's turning too slowly or not at all.                                                                                                                       | Check nothing is blocking the fan. If it's clear, the fan may have failed: contact support. |
| **Ambient probe problem** | The Hub can't get a reading from the Wired Ambient Probe in the Blow, so it has stopped the fan.                                                                                                    | Check the probe is plugged fully into the Blow and clipped at the grate.                    |
| **Hub battery low**       | During a cook, your Forge Hub's battery is running low (about 20% left). If the Hub runs out, the fan stops.                                                                                        | Plug your Forge Hub into power.                                                             |
| **Hub getting hot**       | During a cook, your Forge Hub's battery is getting too hot.                                                                                                                                         | Move your Forge Hub to a cooler spot, away from the cooker.                                 |
| **Hub overheating**       | Your Forge Hub's battery is too hot, so the Hub is shutting down. The Blow's fan stops shortly after.                                                                                               | Move your Forge Hub somewhere cool, away from the cooker, and let it cool down.             |

## Your meat alerts

Your Stick's food alerts (target reached, rest your meat) work as they always do, alongside the Blow. See [Alerts and resting your meat](https://docs.themeatstick.com/cooking/alerts-and-resting).
